EUP11 - Morco 11 Litre EUP Water Heater

SKU: EUP11
View spares for this appliance
View now
387.38 322.82
£387.38 Inc. VAT
£322.82 Ex. VAT

Out of stock

The Morco EUP11 Litre water heater is an EUP compliant direct replacement for the G11E and MP11. Click here for appliance spares.
The flue diameter is the same at 110mm, so if you are replacing a G11E you can use the existing flue.
The EUP11 has a piezo ignition and is not available with an electronic ignition.
The EUPFK fitting/conversion kit will be required in order to fit the water heater as the gas and water connections are different to those on the G11E and MP11. This can be found in the related items section below.
There is a conversion document available on the troubleshooting section of this website and within the fitting/conversion kit to make the replacement of a G11E with an EUP11 more straightforward. This can also be found in the downloads section below.
Flow rate: 11 Litres per minute at 25°C temperature rise (approx.)
Dimensions: H 592 W 314 D 246
Gas Type: LPG
Fully EuP compliant
Open flued
Can only be flued vertically
Flue diameter: 110mm
Piezo ignition
Must be fitted by a Gas Safe registered engineer
387.38 322.82
£387.38 Inc. VAT
£322.82 Ex. VAT

Out of stock

Recently Viewed Items

FTFTPG101 - Flue Terminal & Pipe Kit 11 Litre
EUPFK - EUP6/EUP11 15mm Fitting Kit
EUP6 - Morco 6 Litre EUP Water Heater
Out of stock
View
FTMO38 - Flue Terminal & Pipe Kit 6 Litre
PKE - EUP11RS Fitting Kit