News

 

Water Heater Update

Published: 21st August 2018

Water Heater Update

The new Morco water heaters are now available for purchase.

The D61B and D61E have been replaced by a single model called the MP6 - Morco Primo 6 litre water heater. The G11E has been replaced by the MP11 - Morco Primo 11 litre water heater. These must be purchased with the MPFK Fitting/Conversion Kit.

The pilot on both the MP6 and MP11 is ignited by a Piezo button

The flue diameter accepted is 90mm and 110mm respectively - the same as the D61 and G11

The gas valve connection is 1/2 BSP rather than the 3/4 BSP for the D61B and G11

The conversion kit contains a 1/2 BSP gas isolation valve

The MP6 and MP11 are slightly smaller and so will fit in any current cupboard

The usual Morco spares, advice and support will be provided

They feature a gas control knob and a temperature control knob that work in the same way as the D61 and G11

MP6 and MP11 Installation Guide

Within a couple of weeks, we shall have a guide to help engineers replace a D61 and G11 with our new MP6 and MP11. This will include all of the factors to take into consideration during the replacement. This document will be available within the troubleshooting section of our website. Please keep an eye out for it!

The vast majority of spares for the D61B and G11 water heaters will be continue to be stocked by Morco for many years to come.

We will soon be launching an alternative to the F11EL fan flued water heater.

For further information, please call the Sales Office on 01482 325456

News Archive

All prices shown on this website are in GBP Sterling (£). For any orders from outside the UK please contact Morco Products Ltd for a quote.

Registered Address: Morco Products Ltd, Morco House, Riverview Road, Beverley, East Yorkshire, HU17 0LD

Sales Hotline - 01482 325 456
Fax Hotline - 01482 212 869